当前位置:刻章机|刻字机|光敏机|激光雕刻机【专业_实用_诚信_省心_放心】合肥威宝工厂直销_技术支持_技术问答_技术问答

刻章机 Engraving machine

时间:2020-02-06来源:hfwbsk浏览次数:

Weibo laser seal engraving machine: wb-90c (main push)
 
 
 
 
 
Wb-90c vertical seal engraving machine, with optimized internal structure, adopts aviation aluminum material, light weight, high strength, and absorbs all manufacturers
 
 
 
The advantages of the stamping machine combined with the actual use of customers put forward in the design of a vertical stamping machine.
 
 
 
 
 
The features of the machine are as follows:
 
 
 
 
Although the model of this machine has not been changed, the design and accessories of the machine are based on the actual use and suggestions of the customer,
 
 
 
It has been upgraded and changed constantly, which makes the operator feel relieved and at ease! Therefore, this machine purchased in different periods has the same model,
 
 
 
However, the design and accessories used will be changed and changed. At the same time, it should be noted that the casings are all one in Shijiazhuang
 
 
 
The cost of newly opened mold is tens of thousands of yuan, so we will purchase the shell in the same manufacturer to save the cost of mold
 
 
 
As you will see, there are many manufacturers with similar machine shapes, and the prices range from more than 2000 to more than 10000, and the shell is the same
 
 
 
Yes, but each one uses different parts and designs.
 
 
 
 
 
Details are as follows:
 
 
 
 
1: Since June 2013, the "change-over switch" and "test adjustment knob" have been removed from the machine operation panel.
 
 
 
 
2: Since February 2014, the fixture has been provided with anti-corrosion treatment, with longer service life and thickened track (track diameter of 1.0cm
 
 
 
The old model is: 0.6cm diameter), so the operation is more flexible and the accuracy is higher.
 
 
 
 
 
3: In June 2015, shenzhouyi engraving main board and software were used. The operation of this software is simpler, and the small square port main board was replaced, which is characterized by fast speed. (40 round seal such and such main board is normal for more than 5 minutes, while the easy engraving only needs more than 3 minutes.) it is stable and has high engraving accuracy. In June 2016, the encryption lock was changed to a small one, which is only about half the size of the old encryption lock.
 
 
 
 
 
 
 
4: In January 2016, the laser tube of Beijing aipulong was used, and the parameters were matched with the high-voltage power supply of the iron box to make it play more effectively. at present
 
 
 
In the laser industry, the quality is stable, and it takes a long time to use the epron brand. It uses the same tube as more than 7000 Seal Engravers. This kind of tube
 
 
 
It is characterized by long time and deep carving. Although the cost of the industry recognized tube is higher than that of the ordinary tube, it takes a long time to carve out
 
 
 
The depth is good. At the same time, there are few quality problems with the pipes. There will be no flashover, gas consumption and deep carving. It's safe and easy to use! really
 
 
 
Save money for customers.
 
 
 
 
 
 
 
 
 
 
5: In October 2015, the appearance color of the machine was changed to beige. At the same time, the sensor system of the machine is upgraded to solve the problem of stamping
 
This is more convenient and convenient to use.
 
 
 
 
6: In February 2016, the machine added a filter anti dry winding circuit, which has the advantage that there is no dry winding carved chapter
 
The bottom surface is very flat, and there will be no half stop and half random engraving of the large-scale seal, while the ground wire
 
The requirements are not high, and there are no requirements for computers.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
6: The new structural design has ended the history of the old seal engraving machine's easy deformation and unstable optical path. After the coordinates are adjusted, they can be saved,
 
There is no need to adjust the coordinates frequently. It is also easy to replace the laser tube in the later stage. The customer can also replace it himself. At the same time, use the space above, no
 
It takes up space and has no reflector, which reduces the laser wasted by the middle reflection, prolongs the use time of the laser tube, and at the same time, carves deeper.
 
 
 
 
 
7: The high-voltage power supply adopts the fully enclosed high-frequency system, with fast heat dissipation and embedded module drive to make it stable. Longer service life.
 
 
 
 
 
8: Internal framework, ensure the stability of the machine, long-term deformation, new fixture design, low voice, more clamping force
 
Reliable and maintenance free.
 
 
 
 
 
 
 
9: In the plotter part, the mechanical platform adopts the original imported six balanced linear guide rails, and the upgrade diameter of four rails is 1.0cm thick
 
High precision and long life.
 
 
 
 
10: The motherboard adopts USB interface, which is faster and more stable. It is more convenient to use in practice, and notebook can be used
 
 
 
Connect the machine. There are no restrictions and requirements for computers.
 
 
 
 
11: A light road is more economical and convenient for maintenance. Do not consider the deviation of the light road. The same electric current we carve deeper, one
 
 
 
We save more light in the same depth.
 
 
 
 
12: All electrical parts of wb-90c machine are installed on the back of the machine shell instead of under the base
 
 
 
In this way, the power supply and the main board will not be affected by moisture. We know that once the power supply and the main board are affected by moisture, their stability is far from satisfactory
 
 
 
To the requirements, no doubt increased the cost of after-sales.
 
 
 
 
 
13: For the smoke exhaust part of the engraving machine, the design adopted by 90C machine is easier to smoke exhaust, making the smoke exhaust cleaner, thus reducing
 
 
 
The harm of smoke to human body and lens. The exhaust fan adopts plug-in design, without rose, so the cleaning fan is more
 
Easy, convenient.
 
 
 
 
 
 
 
 
14: In July, 19, we designed a special aluminum plate for the ink back printing and chip seal
 
After the size and height just reach the focus of the laser, this is an optional function, which can only be matched by customers in need.
 
 
 
 
 
15: The maximum size of vertical seal engraving machine is 8 * 10cm, which can not meet the needs of all customers, so
 
In March 2019, we designed a customized model: it can engrave the seal up to 11 * 15cm. Left right and front limits
 
Bit is electronic limit.
 
 
 
 
 
Remind the majority of users that the quality of the machine is seven points and the maintenance is three points. No matter how good the machine is, it doesn't follow the instructions or the training
 
 
 
If the maintenance is carried out according to the said method, the machine will also be injured, which will directly affect the machine威宝激光刻章机:WB-90C型(主推款)
 
 
 
    威宝WB-90C款立式刻章机,优化内部结构,采用航空铝材,重量轻,强度高,吸收各厂家
 
刻章机的优点结合客户的实际使用中所提出的需求设计的一款立式刻章机。
 
 
 
该机的特点如下:
 
 
这一款机器虽然型号一直没变,但是机器的设计和所用配件都根据客户的实际使用情况和建议,
 
进行了不断的升级和改变,使操作者省心.安心!所以不同时期购买的这一款机器,虽然型号一样,
 
但设计和所用配件都将有所变化和更改。同时需要说明的一点就是:因为机壳都是石家庄一个
 
厂家生产的,新开模具费用要好几万,所以大家都会在同一个厂家采购机壳,省去模具费用,所
 
以大家就会看到,有很多厂家机器的外形都差不多,然后价格从二千多到一万多都有,外壳是一样
 
的,但是每一家所用到的零配件都各不相同,设计也都不相同。
 
 
 
下面详情列出:
 
 
1:自2013年6月份以后,机器操作面板上除掉了“转换开关”和“测试调节旋钮”。
 
 
2:2014年2月份以后夹具做了防腐蚀处理,使用寿命更久,轨道加粗加厚(轨道直径1.0CM   
 
老款是:0.6CM直径),这样运行更灵活,精度更高。  
 

咨询电话:0551-64321813 网址:https://www.hfwbsk.com
联系人:王先生 手机:13856087230 公司地址:安徽省合肥市瑶海区当涂路220号
版本权有:合肥威宝数控科技有限公司 ICP: 皖ICP备10003291号-1